Close
Overlay

Enzo Ingriselli - Connecticut

Enzo Ingriselli
Send Message
Connect

About Enzo Ingriselli

Enzo+Ingriselli
Enzo Ingriselli is currently living in Connecticut, and is interested in Engineering.
Not the person you're looking for?
Find more results for Enzo Ingriselli

Location

Connecticut

Categories of Interest

Engineering

Company Size

201-1000

Resume

ENZO INGRISELLI
74 Autran Ave. Southington Ct. 06489 Phone = 860-276-0436 E-Mail = mardanik@snet.net

OBJECTIVE:
MECHANICAL DEVELOPMENT ENGINEER:
Pro-Engineer:
A position of responsibility in the Conceptual Design and Development of
consumer products, with the aide of a Pro-E system so that my abilities
& experience can best be utilized.

QUALIFICATIONS
Over Twenty years experience in the field of conceptual design thru
completion of packaging & documentation management.

More than 20,000 hours with Pro-E software. Started with Pro-E Rel #17 &
PDM to WildFire 4.0, WINDCHILL
PDM, INTRALINK, PRO-SHEETMETAL,PRO -CABLE on WINDOWS NT Platform

Pro-E skills include Geometric Dimensioning & Tolerance, CERTIFICATE 2009
Mil Standards, ANSI Y14.5, family tables, database management, Bill of
Material\'s along with 3-D modeling and 2D drawings.

WildFire 4.0, Pro-Sheetmetal and Pro-Cable has allowed me to be kept up
to date with the latest version of Pro-E software.

PTC Windchill Gateway and ProjectLink experience has enhanced my
abilities in the Database management of documentation.

EDUCATION: WATERBURY & HARTFORD STATE TECHNICAL COLLEGES
MILITARY: UNITED STATES ARMED FORCES

EXPERIENCE:

STANADYNE AUTOMOTIVE CORP - Windsor CT. 06095, JUNE 08 to PRESENT
ELECTRICAL/MECHANICAL PKG. DESIGNER:
DIESEL PUMP DESIGN (Details upon request)

KOLLMOGEN - Northampton, MA. 01089 MAY 06 to JUNE 08
ELECTRICAL/MECHANICAL PKG. DESIGNER:
Navy Application (Details upon request)

K&M ELECTRONICS ITT - West Springfield, MA. 01089 NOV 05 to MAY 06
ELECTRICAL/MECHANICAL PKG. DESIGNER:
Product Development - Responsible for the design of a Power Supply system
used in HUMVIE for military application. I packaged a complete power supply
with all related components such as bricks, bridges, resistors
and condenser to name a few. This lead to a million dollar contract with company.

PELCO - Orangeburg, NY 10962. MAR 05 to NOV 05
ELECTRICAL/MECHANICAL PKG. DESIGNER:
Product Development - Was responsible for the design of a Fiber Optic
Transmitter. Sheetmetal and mechanical parts designed to be packaged in
Camera Enclosure. The harnesses were also designed with specific
connectors. I determined the locations of connectors ect... for proper
position on PC Board.

PITNEY BOWES - Waterview Dr. Shelton., CT. JAN 04 to FEB 05
MECHANICAL DESIGNER:
Assisted in the development of a new product Envelope Stacker.This is an
add-on to a Sebring machine. The use of Windchill has broadened my
knowledge of documentation management, and has allowed for departments to
interaction for product sales.

UTC FUEL CELLS - 195 Governors Hywy So. Windsor. MAR 02 to AUGUST 03
LEAD DESIGNER: GRANTED A PATTENT
The development or a new fuel cell power plant for automotive use has given
me an opportunity to design a fuel and fluid distribution system. This
design has lead to an elaborate fuel and fluid flow of Hydrogen, Water and
Air consisting of piping and related fittings under specific pressures.
Seals for pressure were critical. Have been granted a patent for design. In
addition I have written (ECNs) for product improvement.

ASML - Shelton CT. OCT 01 to MARCH 02
DESIGN CHECKER:
Using Pro-E and intralink Model Check. In this environment I have become
familiar with Projection Optical Box, Beam Tube Assembly, and Condenser
Assemblies along with precision mechanics units of measure in microns, mils
and wave.

POWER MEDICAL INTERVENTION - Shelton CT. OCT 00 to JULY 01
PRODUCT DESIGNER:
Design release of new product surgassist. My task was to design a new
product 30mm right angle cutter to be used with surgassist.
HOMER BRONSON - RTE 8, Winsted CT. 06098
Assigned to company as a consultant to upgrade PRO-E software to 2000I2 on
Windows NT Developed hinge designs for OEM consoles in various automobiles.

EATON - 21 South St., Danbury CT, 06410 JAN 00 to SEPT 00
MECHANICAL DESIGNER:
As a consultant my responsibility was to create a 3-D model assembly of a
control cabinet for a military application using PRO-E and PDM. The cabinet
was a weldment of 1/4-3/8\" thick steel plates which had to withstand tons
of impact and still function. My roll was to have a working 3-D model out
of PDM. In addition had to build new models for card racks and power supply
systems as well as redefine existing component assemblies. Due to the
magnitude of the assembly the system required an upgrade.

COMARK COMMUNICATIONS INC.-104 Feeding Hills Rd, Southwick, MA
JUNE 98 to DEC 99
MECHANICAL DEVELOPMENT ENGINEER:
Redesigning of a transmitter which involved the design of new components
and redesign of existing cabinet weldment. Created a 3-D model assembly of
transmitter that contained over three hundred sub-assemblies
and component parts. The cabinet size was 76.0\" tall by 32.0\" wide by 72.0\"
long, Pro-sheetmetal used for welded construction with more than seventy-
five parts welded using CLECO fasteners for accuracy. Upon completion of
model created the supporting documentation for manufacturing and
fabrication of cabinet.

JACOBS VEHICLE SYSTEMS - South Windsor CT. SEPT 97 to JUNE 98
PRODUCT DESIGNER:
Using Pro-E,PDM, CADKEY and CAMMNET systems to design and document various
Exhaust Brake systems for MACK TRUCK, and MERCEDES BENZ. An exhaust brakes
primary function is to retard the engines combustion and assist in slowing
the vehicle down. Training in Pro-E has brought me to a new level of
efficiency in modeling and assembly of 3-D castings and surface modeling.

AUTOMOTIVE CONTROLS CORP. - 1 Echlin Road, Branford, CT. 1992 to 1997
PRODUCT DESIGNER:
With the use of Pro-E and AutoCAD Rel #12 cad system, designed and
documented automotive parts such as
Coils Distributor Caps, Rotors & Sensors for various product lines.
Followed by all related bills of material and flow charts of assembly
processes. I have also contributed in the customization of AutoCAD software
for companies strive in rapid delivery of component drawings to vendors, so
that we can reduce the time to market for manufacturing molds. I developed
and refined a protected ECN template in WORD97 to establishing a standard
procedure for company\'s global use.

HARCO LABS, INC. - 186 Cedar Street, Branford, CT. 1989 to 1992
DRAFTING SUPERVISOR:

Quick Profile Summary

Enzo Ingriselli
Name: Enzo Ingriselli
Link: http://www.salespider.com/p-8468413/enzo-ingriselli
Location: Connecticut,United States

Explore using SaleSpider

Businesses You May Be Interested In

 Business Picture
 Business Picture
 Business Picture
 Business Picture

People you may know from

 Business Picture
 Business Picture
 Business Picture
 Business Picture

Enzo Ingriselli’s Business Connections

Find more information on the Company

Share This Profile

Member Spotlight

sophia sipes Icon
Sophia Sipes
TSG Group
Finance Consultant

Business Spotlight

DJ Connection Kansas City Icon
DJ Connection Kansas City
Http://www.kansascitydjconnection.com/
»
»
»
Enzo Ingriselli
Who Viewed This Page
458376 views
Last Seen
Thursday August 11, 2016
Top Cities
Delhi 1.7%
Toronto 1.17%
Bangalore 1.1%
Top Browser
Chrome Chrome51.56%
Iphone16.42%
Firefox Firefox14.07%
OS Expand
Windows
42.06%
Android
27.51%
Iphone
16.91%
Device Expand
Desktop
50.37%
Mobile
43.63%
Tablet
5.99%
Language Expand
En-US
64.76%
En-us
17.89%
En-GB
2.84%
spacer pixel