Configuration: Digital Servo drive, friction feed with grit roller
Maximum cutting area: 64" x 164 ft.
Cutting area of guaranteed accuracy: 64" x 49.2 ft.
Mountable media: Min - 2"; Max - 72.8"
Maximum cross cut area: 68.8"
Number of push rollers: 4
Maximum Cutting speed: 58.4"/second
Axial acceleration: 4G in 8 steps
Cutting force: 600gf in 48 steps
Mechanical resolution: .0055mm
Programmable resolution: GP-GL 0.1/0.05/0.025/0.01, HP-GL 0.025
Distance accuracy: Maximum 0.004" or 0.1% of plotted length
Repeatability: Maximum 0.004" in plot up to 78.7"
Minimum character size: approximately 0.12"
Blade type: Supersteel (0.99mm or 1.5mm diameter)
Pen type: water-based fiber-tip and oil-based ballpoint pens
Media type: self adhesive marking vinyl up to .25mm thick, polyester film up to .25mm thick, sandblast resist rubber up to 1mm thick, regular paper from .06mm to .13mm thick
Light pointer: built into the tool carriage
Cross cutter: built into the tool carriage
Perforation cut: supported (performed by force control)
Interface: USB 2.0 (full speed), RS-232C, Ethernet
Buffer memory size: 2MB
Registration mark sensing system: scans the mark by optical sensor (ARMS5.0), segment area and multiple marks compensation, 4-points axis alignment, auto mark detect
Display: Graphic type LCD (3" size with backlight)
Power source: 100 V to 240 V AC, 50/60 Hz
Power consumption: Maximum 160VA
Dimensions (WxDxH)(including stand): 84.2" x 28.2" x 48"
Weight (including stand): 130 pounds
Included software: windows driver, plotter controller, Graphtec Studio, Cutting Master 4
Compatible Operating Systems: Windows 8, Windows 7, Windows Vista, Windows XP, Mac OS X