Nowadays, plastic extrusion machineries are widely been used in plastic industries. The process of plastic extrusion machinery involves the process of melting the plastic material converting it into a die, shape it and cutting it with the proper length. It is a good solution for a product with constant cross section. One of the advantages of plastic extrusion is the low cost and high production rate for manufacturing products like piping, plastic sheeting, wire insulation, weather stripping, and adhesive tape.
Blown Film Plant ?
Blown Film Plant is one of the most common methods to make plastic films that is been used in the packaging industry. It involves a simple process as the molten polymer tube is been extruded and inflated several times in order to form a thin bubble. Further, this bubble is collapsed and used to make bags. The materials used with this process are polyethylene and other polymer materials.The blown film plant is further been categorized as monolayer film plant, three layer film plant (a-b-a), three layer film plant (a-b-c), two layer blown film plant.
There is a difference between these plants as monolayer thin film consists of one extruder whereas three-layer film plants (a-b-a) and three-layer film plant (a-b-c), two layer blown film plant consists of two and three extruders respectively. For more information contact us on below address
2, ABM Society, Nr. Santosh Starch,
Stovec Industries road, N.I.D.C Lambha Village,
Narol, Ahmedabad- 382405,
Phone - +91-9099022040, +91-9825911468
Telefax: -+91 79 25736690 /25731635
Email - firstname.lastname@example.org