With allied voice prompt interface, Support IOS/Andriod app mobile remote control in any network status 3G/4G/Wifi ect. including 2 wireless remote controller, 1 wireless door magnetic contact sensor,1 wireless PIR motion detector with PET immunity as KIT. With function of RFID card door access.
TCP/IP, GSM, PSTN and RFID 4 network
8 Wired Zones
32 Wireless Zones
1 PGM Port
6 voice alarm receiving phone No.
512 alarm event log with time and date
8 wireless remote controllers
1 door bell
16 electronic switch control
Up to 16 RFID tags reader
4 groups of timing arm/disarm
15V Auxiliary output / back up battery time 8 hours
433/868MHz frequency for options
All settings can be done on web IE with RJ45 Ethernet cable port in the device, easy and quick, the user can inquiry alarm info ONLY if there is mobile,
tablet or office PC. Any time, any where, the whole system is in control.
OEM your own native language for the UI in web IE, make it easier be accept by your local market.
Remotely upgrade, even the en-users can update the latest version of the device by themselves, the installer does not need drive far away to fix it.
We have built up P2P server both in China and European, each device can get a unique ID to log in phone app(IOS and android). No matter in WAN or LAN network,the user can configure and check alarm info on one mobile phone.
16 RFID tags can be add to the device, able to be programmed as disarm, disarm then stay arm, disarm and send sms etc., very convenient to be used by kids, housekeepers, elderly people.
Programmable output can provide DC voltage 13-14.5V, 200mA.
The user can disable/able the output via password, alarm, arm,
AC off and communication fault events, usually work with a relay to control a camera, electric locks and door.
The device can work with wireless electrical switch, enable the user can control at max 16 home lights on phone app or web IE.
As well, it is able to set the lights timing on/off, make your home smarter!
The device supports international SIA and CID protocol,able to upload the alarm events to monitoring center via three methods, IP port, GPRS and telephone, make the whole system more secure.